Page 1
ASSEMBLY INSTRUCTION OSBORNE 4 DOOR BUFFET ITEM CODE 77214 Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia. For any assistance with assembly or for missing parts please refer to your receipt...
PRE-ASSEMBLY PREPARATION Before you start: 1.Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product 2.Take care when li�ing. Product should be assembled as near as possible to the point of 3.Ensure that you have all required contents for complete assembly 4.Always read the assembly instruc�ons carefully before beginning assembly.
Page 5
PARTS LIST ITEM QTY NO. ITEM 1 PC TOP PANEL 1 PC BOTTOM SUPPORT METAL 1 PC 1 PC LEFT SIDE PANEL METAL LEG 1 PC 1 PC RIGHT SIDE PANEL MIDDLE PANEL 1 PC 2 PCE BOTTOM PANEL SHELF PANEL 2 PCE 1 PC BACK PANEL...
Page 12
STEP 13: STEP 14: Assemble these four holes first, adjust the door and ensure it is level, then tighten all screws. How to adjust the door and ensure it is level, please see the below information.
Page 15
ASSEMBLY IS COMPLETE CAUTION:Always Lift Your Furniture When Moving /Relocating - Do Not Drag. Dragging Can Cause The Legs To Bend/Break.
Page 16
SAFETY BRACKETS INSTRUCTIONS 1. Attach the strap to the furniture frame with the small screw and washer. 2. Move the furniture to its final position.Attach the strap to the wall with the large screw and washer. If mounting into brick or masonry you will need to acquire wall anchors.
Page 17
To protect your furniture, we suggest the following: • Avoid placing your furniture in direct sunlight. • Do not place furniture directly under windows. • Do not place sharp materials (knife, fork, etc.) directly onto your furniture as sharp material may scrape and damage the finish.
Need help?
Do you have a question about the OSBORNE 77214 and is the answer not in the manual?
Questions and answers