Page 1
ASSEMBLY INSTRUCTION SAVONA 4 DOOR BUFFET ITEM CODE 78839 Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia. For any assistance with assembly or for missing parts please refer to your receipt...
PRE-ASSEMBLY PREPARATION Before you start: 1.Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product 2.Take care when li�ing. Product should be assembled as near as possible to the point of 3.Ensure that you have all required contents for complete assembly 4.Always read the assembly instruc�ons carefully before beginning assembly.
Page 4
PARTS LIST ITEM QTY NO. ITEM 48PCS 18PCS Φ4*14 Φ6*35 4PCS 18PCS Φ15*10 20PCS 4PCS Φ6*30 6PCS 4PCS Φ4*40 2PCS 16PCS 16PCS Φ3*16 ITEM QTY NO. ITEM TOP PANEL 1 PC 1 PC RIGHT DOOR PANEL 1 PC LEFT SIDE PANEL 1 PC LEFT DOOR PANEL 1 PC...
Page 11
STEP 13: STEP 14: Assemble these four holes first, adjust the door and ensure it is level, then tighten all screws. How to adjust the door and ensure it is level, please see the below information.
Page 13
STEP 16: WALL ASSEMBLY IS COMPLETE CAUTION:Always Lift Your Furniture When Moving /Relocating - Do Not Drag. Dragging Can Cause The Legs To Bend/Break.
Page 14
SAFETY BRACKETS INSTRUCTIONS 1. Attach the strap to the furniture frame with the small screw and washer. 2. Move the furniture to its final position.Attach the strap to the wall with the large screw and washer. If mounting into brick or masonry you will need to acquire wall anchors.
Page 15
To protect your furniture, we suggest the following: • Avoid placing your furniture in direct sunlight. • Do not place furniture directly under windows. • Do not place sharp materials (knife, fork, etc.) directly onto your furniture as sharp material may scrape and damage the finish.
Need help?
Do you have a question about the SAVONA 78839 and is the answer not in the manual?
Questions and answers