Table of Contents
Advertisement
2.
Installation
.
2.1. Bearing capacity
If the product is installed in a wall-mounted way, the bearing capacity of the surface
for installation must be at least four times of the weight of the product. If the surface
for installation is a wall or the ceiling of a building, the surface must be made of
solid bricks, concrete or other materials with equal intensity. If the product is
installed on a surface made of loose material such as an old brick wall, wood plank
wall, solid brick wall, a metal or non-metal structure surface, or a surface with a
thick decoration layer, take necessary consolidating measures to ensure that the
product is stably installed.
Step1: Punching holes in the wall
Mark 8 holes location on the wall according to wall mounting bracket A and use the
drill bit drilling the 8 holes. Depth of holes not less than 90mm (Ref. Picture 1)
5
Advertisement
Table of Contents
Need help?
Do you have a question about the IQTouch TB1100 Pro Series and is the answer not in the manual?
Questions and answers