Property 0X34 - Mask Aamva Card Data; Property 0X3A - Boot Firmware Id - Magtek iDynamo 5 Gen III Programmer's Manual

6 - Properties
6.21 Property 0x34 – Mask AAMVA Card Data
An AAMVA card is typically used for Drivers Licenses and ID cards.
Property ID: 0x34
Property
Byte
Type:
Length: 1 byte
Get Property: Yes
Set Property: Yes
Default
0x00
Value:
•
0 = Sends masked AAMVA card data.
•
1 = Sends clear AAMVA card data.
6.22 Property 0x3A – Boot Firmware ID
Property ID: 0x3A
Property
ASCII
Type:
Length: varies
Get Property: Yes
Set Property: No
Default
N/A
Value:
This read-only property returns the boot firmware part number, a dash, the major and minor revision
number, followed by a dash and the firmware type.
{boot fw pn}-{rev}-PCI
Example: 1000004854-AA0-PCI
iDynamo 5 Gen III| Secure Card Reader | Programmer's Manual (COMMANDS)
Property Description
Property Description
Page 38 of 48 (D998200587-101)