Command 0X030D - Read Date And Time; Command 0X0703 - Get Key Information - Magtek iDynamo 5 Gen III Programmer's Manual

4 - Commands
Table 4-7 Reset Device Command
Command Parameter Data Len
0x0002
4.4

Command 0x030D - Read Date and Time

The host uses this command to get the date / time from the device's internal clock. The value returned is
set to Coordinated Universal Time (UTC). The host is responsible for converting the response to local
time.
Table 4-8 Read RTC Command
Command Parameter Data Len
0x030D
Table 4-9 Read RTC Response
Return Code Response Data Len
0x0000
Table 4-10 Read RTC Response Data
Length Field Name
1 Month
1 Day
1 Hour
1 Minute
1 Second
1 Unused
1 Year
4.5 Command 0x0703 – Get Key Information
This command returns the information about the specified key to the host.
Table 4-11 Get Key Info Command
Command Parameter Data Len
0703
iDynamo 5 Gen III| Secure Card Reader | Programmer's Manual (COMMANDS)
Parameter Data
0x0000
Parameter Data
0x0000
Response Data
0x0007
Value
Value from 0x01...0x0C (1-12)
Value from 0x01...0x1F (1-31, depends on the
month)
Value from 0x00...0x17 (0-23)
Value from 0x00...0x3B (0-59)
Value from 0x00...0x3B (0-59)
0x00
Value from 0x00 (2008) ...0xFF (2263)
0002 Key ID
Page 22 of 48 (D998200587-101)
None
None
See Table
Parameter Data