Property 0X28 - Start Sentinel Track 2 (7-Bit); Property 0X29 - Start Sentinel Track 3 (7-Bit) - Magtek iDynamo 5 Gen III Programmer's Manual

6 - Properties
Default
0x23 ('#')
Value:
The device uses this character for the Track 3 start sentinel when it recognizes the track is encoded in the
standard Track 3 AAMVA format.

6.17 Property 0x28 - Start Sentinel Track 2 (7-bit)

Property ID: 0x28
Property
Byte
Type:
Length: 1 byte
Get Property: Yes
Set Property: Yes
Default
0x40 ('@')
Value:
The device uses this character for the Track 2 start sentinel when it recognizes the track is encoded in the
7-bit ISO format, normally used for Track 1.

6.18 Property 0x29 - Start Sentinel Track 3 (7-bit)

Property ID: 0x29
Property
Byte
Type:
Length: 1 byte
Get Property: Yes
Set Property: Yes
Default
0x26 ('&')
Value:
The device uses this character for the Track 3 start sentinel when it recognizes the track is encoded in the
7-bit ISO format, normally used for Track 1.
iDynamo 5 Gen III| Secure Card Reader | Programmer's Manual (COMMANDS)
Property Description
Property Description
Property Description
Page 36 of 48 (D998200587-101)