Property 0X2B - Track End Sentinel; Property 0X31 - Mask Other Cards - Magtek iDynamo 5 Gen III Programmer's Manual

6 - Properties
6.19 Property 0x2B – Track End Sentinel
Property ID: 0x2B
Property
Byte
Type:
Length: 1 byte
Get Property: Yes
Set Property: Yes
Default
0x3F ('?')
Value:
The device uses this character for all track end sentinels.

6.20 Property 0x31 - Mask Other Cards

Property ID: 0x31
Property
Byte
Type:
Length: 1 byte
Get Property: Yes
Set Property: Yes
Default
0x00 (Don't Mask Other cards)
Value:
This property designates whether cards which do not decode as either ISO/ABA (Financial) or AAMVA
(Driver License) format should be sent with their data masked or unmasked. The default value (0x00) is
to send the data unmasked. If this property is set to 0x01, the device sends the track(s) to the host using a
"0" for each byte of track data the device reads from the card.
If a card is encoded according to ISO/ABA rules (Track 1 in 7-bit format, Tracks 2 and Track 3 in 5-bit
format), and it's not a QWANTUM card, and Track 1 does not begin with the character 'B', the device
always sends the Track 1 Masked Data value unmasked, regardless of the value of this property.
iDynamo 5 Gen III| Secure Card Reader | Programmer's Manual (COMMANDS)
Property Description
Property Description
Page 37 of 48 (D998200587-101)