Download Print this page
Roban AS 350 Instruction Manual

Roban AS 350 Instruction Manual

Scale fuselage 450 size
Hide thumbs Also See for AS 350:

Advertisement

Quick Links

Instruction manual
Scale Fuselage AS 350
450 size
1. INTRODUCTION
Thank you for buying Roban Model products. The 600 size MD500D/E scale fuselage is designed as an
easy to use product. Please read the manual carefully before assembling the model, and follow all
precautions and recommendations located within the manual. Be sure to retain the manual for future
reference, routine maintenance and tuning. The scale fuselage is designed for T-REX 600 Helicopter
series use. You can easily put it on your T-REX 600 for new clothing.
Important Note
Roban Model R/C Helicopters are advanced, high-performance devices, built incorporating the latest
technologies. They are not intended as toys, and improper use can potentially lead to serious injury,
or even fatal accidents. We implore you to read this manual thoroughly before operating these
models. Safety should be your utmost priority - not just your own, but also that of others and your
surroundings when piloting Roban Model products.
Liability Disclaimer:
The manufacturer and the seller cannot accept liability for the operation or misuse of this product.
Roban Model R/C helicopters are intended to be used exclusively by experienced adults in legally
sanctioned flying fields. Once sold, we cannot monitor or control the product's operation or usage.
Operation Guidelines:
Upon assembly of the scale fuselage, the weight and complexity of the structure will increase. To
mitigate risk of accidents and damages, we advise against attempting 3D flights.
Skill Requirements:

Advertisement

loading
Need help?

Need help?

Do you have a question about the AS 350 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Roban AS 350

  • Page 1 450 size 1. INTRODUCTION Thank you for buying Roban Model products. The 600 size MD500D/E scale fuselage is designed as an easy to use product. Please read the manual carefully before assembling the model, and follow all precautions and recommendations located within the manual. Be sure to retain the manual for future reference, routine maintenance and tuning.
  • Page 2: Contents Of Kit

    The operation of R/C products necessitates a certain level of skill and familiarity. Any damages or dissatisfaction resulting from accidents, modifications, or operational mishaps are not covered under any warranty. Consequently, such products cannot be returned for repair or if you experience problems during operation or maintenance.
  • Page 3 CONTENTS Item No. Description Quantity Landing gear struts Connector (no item listed) T-connectors Landing gear skids Washers 3x12x51 EVA rear rubber Tail skid Screw M2x25 Washer M2 Nut M2 (no item listed) (no item listed) (no item listed) (no item listed) Tail unit Upper windows Lower windows...
  • Page 4 REQUIRED TOOLS / CONSUMABLES Tool No. Tool/Consumable Hobby knife Allen wrench Phillips screwdriver File Side cutters Silicone adhesive Super glue 2K Epoxy glue Fine sandpaper Scissors...
  • Page 5: Installation

    4. INSTALLATION Glue the landing gear linkage with the connectors as shown. Attach the T-connectors to the linkage as shown. Glue the skids to the linkage and the step as shown.
  • Page 6 Glue the washers. Mount the washers on the mechanism as shown. Dismantle the tail cover.
  • Page 7 Insert the mechanism into the fuselage. Install the EVA rubber in the tail. Install the tail frame.
  • Page 8 4.10 Install the tail skid. 4.11 Install the cover. 4.12 Secure the mechanism with 4 pieces of Screw M2x25, Washer 2x5x0.4, and Nut M2 in the fuselage.
  • Page 9: Spare Part List

    4.13 Glue the tail control surfaces. 5. SPAREPART LIST HSB- 450EC-135 前 450 EC-135 EC450PJ001 EC450YER 头 canopy 450 EC-135 450EC-135 平 EC450PJ002 tail wing 垂尾 450 EC-135 450EC-135 脚 EC450PJ003 landing 架组 gear 450EC-135 脚 450 EC-135 EC450PJ004 踏 foot rest 450 EC-135 450EC-135 固...
  • Page 10 6. FULLY ASSEMBLED FUSELAGE Specifications: Lenght: 760mm Height: 225mm Width: 175mm Weight: 320g Suitable for Align TREX450 and derivatives We wish you a lot of fun with the fuselage! Copyright 2024 – www.robanmodel.com...