Omron VARISPEED J7 System Configuration Manual page 4

Digital operator
Data display
Display selection key
Switch functions among function
display LEDs.
Enter key
Enter data when setting constants.
After selecting constant no. at
PRGM mode, data are displayed.
Increment key
Increase constant no. or data.
Decrement key
Decrease constant no. or data.
Stop/Reset key
Press to stop the motor. If fault
occurs, reset the inverter.
354
FREF FOUT
Frequency reference Output frequency
setting/monitoring monitoring
F/R
Operator RUN command
FWD/REV selection
Digital operator
Function display LEDs
Selected function is lit (see the
functions below).
displayed on data display.
Operation key
Press to run the motor. The RUN
light is ON while running.
Alarm LED
Run LED
Frequency setting volume
Set operational frequency with
volume.
IOUT MNTR
Output current Multi-function
monitoring monitoring
LO / RE PRGM
LOCAL/REMOTE
Constant no./data
selection
Frequency inverters
Its data is