Omron NTXS Manual page 92

Representing Data
Fill Color
Select the lamp color for each state.
Size
If the style is 'Lamp', 'Indicator', or 'LED', the lamp size can be changed from 1x to 2x.
Text Properties
Different text strings can be specified for each state if the Text option is enabled.
1. Text : Up to 20 characters of text can be displayed.
2. Font : Used to change the Windows® Font , Font Style and Font size.
3. Language : Displays the list of languages depending upon number of languages configured in
the Unit settings.
4. Text Color : Select the color of the text.
State Tag
This tag is used to determine the present state of the word lamp. This can be either a NTXS unit tag or
a PLC tag.
State conditions and Tasks
This table is a list of the states defined for the word lamp with their corresponding high and low limits.
Up to 32 different states can be defined.
Add new state
Clicking this button adds a new state to the list.
Delete state
Select a particular state by highlighting it, and use this button to delete it.
Simulate
User can simulate various languages configured in the wizard, and can see its preview in the preview
window.
General Attributes
Label selection
If the Word Lamp Style is "Generic", then the lamp can have a label by enabling the "Label" checkbox.
1. Text
2. Font
3. Language
4. Text Color
5. Background
6. Label position
86
: Up to 14 characters of label text can be defined.
: Select the Windows® Font, Font Style and Font size.
: Displays the list of languages configured in the NTXS settings.
: Selects the color of the text.
: Selects the background text color.
: If the "Top" option is selected, the label is shown above the lamp. If the
"Bottom" option is selected, the label is shown below the lamp.