Omron NTXS Manual page 130

Task Management
E.g..- STR (Screen Triggering Register) = Tag A
This task is executed on register tags listed under Tag option. Two byte tag value are transferred to STR.
This task is used to jump to the screen number specified by value of STR.
For this task default setting is shown under 'Common operations'. If user change this selection, task will
be changed.
Click 'OK' to add task in task list.
Copy tag to LED
LED's on the keypad of NTXS can be turned on/off depending on the value of a tag. The tag should be
copied to LED register and the LEDs will display the tag value.
E.g..- LED = Tag A
LED is a internal unit register mapped to LED's displayed on unit. This task is executed on register tags
listed under Tag option. Two byte tag value are transferred to LED register.
Note: This task is supported only for the units having LEDs on it.
For this task default setting is shown under 'Common operations'. If user change this selection, task will
be changed.
Click 'OK' to add task in task list.
Delay
Any task can be delayed using this task. Tags will be updated during this delay. After the delay is
completed the next task will be performed.
124