Omron NTXS Manual page 133

For e.g..- As shown above, 10 sequential PLC tags starting from IR00000 (i.e IR00000 to IR00009) will
be copied to 10 sequential unit tags starting from D0000 (i.e. D0000 to D0009).
To prevent no. of write cycles to EEPROM (retentive memory area), this command is not supported in
Global task-list and While showing task-list, if retentive register is selected as unit tag.
Click 'OK' to add task in task list.
Copy RTC to PLC Block
This task is supported only in Global task-list. This task copies sequentially 7 RTC parameters from
selected tag after every specified RTC Download Time. If this time is specified as 0 sec. then it means
this task will be executed as per Global task-list execution time.
Click 'OK' to add task in task list.
7 RTC parameters are copied in the PLC Tags starting from the First PLC Tag (IR00000 as shown
above) following sequence-
1st Tag - Hours
2nd Tag - Minutes
3rd Tag - Seconds
4th Tag - Date
5th Tag - Month
6th Tag - Year
7th Tag - Day of week
Goto Popup Screen
Task Management
127