Omron NTXS Manual page 68

Representing Data
This box will allow user to select either Coil Data Entry or Register Data entry. By default Coil data entry
is selected
1. Coil-Tag : Select Coil tag from the list.
2. On Text : Enter On text maximum up to 40 characters.
3. Off Text : Enter Off text maximum up to 40 characters.
4. Popup : If user wants data entry with popup keypad then user has to check Keypad option and also
select popup screen number from the list. If user don't want popup data entry then he has to add static
numeric keypad object on screen.
To edit a register, select Register Data Entry .
Register Data Entry dialog box allows user to select the -
1. Register-Tag : This is a list of tags available in the application. The list will not display any read only
registers that can not be modified.
2. Data Type : This selects the type of data to be entered. Choices are Unsigned Integer, Signed
Integer, Hexadecimal, BCD, Binary (1 word), Float.
3. Format : Determines the format of the data to be displayed.
4. Low-limit : Data entered can be limited by assigning Low limit.
5. High-limit : Data entered can be limited by assigning High limit.
6. 1st-operation : User can define math operations like addition(+), subtraction(-), multiplication(*),
Division (/). By default selection is NOP i.e. no operation.
7. 2nd- operation : User can define math operations like addition(+), subtraction(-), multiplication(*),
Division (/). By default selection is NOP i.e. no operation
62