Omron NTXS Manual page 57

Tag Database for NT2S Series:
Add - User can add tag with this button. Before clicking this button user has to select
1. Node
2. Read
3. Tag Type
4. Tag name
5. Byte(s)
Change – User can change tag information (like register/coil number, tag name, Byte(s)) by selecting
tag. Change the information and then click on Change button.
Delete - Select the tag and click on Delete button to delete the tag. Before deleting any tag, the user
must delete any references to the tag in screens and tasks. Otherwise it can not be deleted.
: For which tag is going to be defined.
: Write Register or coil - User can select Read only or Read-Write type
tag.
: Register / Coil or Bit addressed Register. User has to choose the
register number or coil number within the limit shown.
: Each register / coil in the unit /PLC memory has a unique and specific
name to identify it. User can define name up to 40 characters.
: If selected tag is of register type then user can define it as a 1- byte (
Low-byte / High-byte), 2-byte, 4-byte.
Using NTXS Software
51