Download - Omron NTXS Manual

Uploading and Downloading from unit
During uploading following errors may occur
1 Unit is not responding
This error indicates that no communication has been established between the computer and the NTXS
unit. Check the COM port selection and cable connections.
2 Unit is not responding after frame number XXXX
Communication with unit has been lost. Try uploading again. You may need to close the NTXS program
and restart it.
8.2

Download

When user clicks 'Download' button from Toolstation or chooses Communicate|Download menu, a
DOS window appears for a moment to link PLC drivers with firmware as per application.
Once compiling of project is done then following window will display.
Communication Port – User has to define here communication port for downloading. By default Com1
is selected.
Download – User has to select proper option to download.
1. Firmware
2. Application
3. Fonts
Application
Select this option to download application to unit.
146