Omron NTXS Manual page 132

Task Management
By using this task, user can set time and date for Real Time Clock (RTC). This can be done by
incrementing or decrementing Year, Month, Date, Hour, Minute, Second or Day of Week. Increment /
decrement is done by 1. From these references, RTC counts all parameters with leap year compensa-
tion.
Click 'OK' to add task in task list.
Print Data
This task is supported in key tasks only. Alphanumeric data displayed on current screen can be printed
using this task. User has to define the port as 'Serial printer' for executing this task. Any of the two ports
can be configured for printing and printing will be done from the port which is configured for printing as
mentioned above.
Copy NTXS Block to NTXS / PLC Block
This task is executed on register tags only. This task is used to copy unit tags to PLC tags. This is two
byte copy
For e.g..- As shown above, 10 sequential unit tags starting from D0000 (i.e. D0000 to D0009) will be
copied to 10 sequential PLC tags starting from IR00000 (i.e IR00000 to IR00009).
Click 'OK' to add task in task list.
Copy PLC Block to NTXS Block
This task is executed on register tags only. This task is used to copy PLC tags to unit tags. This is two
byte copy command. Unit block means any unit tags or retentive memory area.
126