Omron NTXS Manual page 131

This task is supported for screen 'While showing' only . User can specify delay from 1 sec to max 3600
sec.
Note: More than 1 delay task is not supported.
Wait
This is a conditional delay. Next task will not be performed till the specified condition is false. Execution
remains in wait state till wait condition is true. Task following wait task is executed only after wait condi-
tion is false; Operand could be either number between 0 to 65535 or PLC tag.
This task is supported only in 'While showing' Tasks of the Screen Tasklist . Tasks defined after this task
are not executed until the condition specified is true.
Here Tag is compared with the Operand. Operand can be a Number (0-65535) or Tag. Operation can be
=, !=, <, <=, >, >=.
If Tag to be compared is bit/coil type then it is compared with On/Off state.
Click 'OK' to add task in task list.
Set RTC
User can edit RTC (Real Time Clock) registers of the NTXS unit. This task increments selected RTC
register at a time for one instance. User edit Year / Month / Date / Hour / Minutes / Seconds / Day of the
week. User must place a Time / Date object on the screen for editing the RTC. This task is supported in
key tasks only.
Task Management
125