Download Print this page

OMRON M10-IT Instruction Manual: Using The Auto Mode

Digital automatic blood pressure monitor.
Hide thumbs


Using the Auto Mode

Select your user ID (A or B).
Press the O/I START button.
All symbols appear on the display. The user ID Symbol you
selected flashes on the display. The cuff starts to inflate
Note: To stop the inflation or measurement, press the O/I
START button. The unit will stop inflating, start deflating
and will turn off.
Inflation stops automatically and the measurement is started.
As the cuff deflates, decreasing numbers appear on the
display. The heartbeat symbol (
When the measurement is complete, the arm cuff completely
Note: Do not move your arm and remain still until the entire
measurement process is completed.
Check the progress of the consecutive measurements.
The first measurement is complete, waiting to start the next
measurement. The interval of time set between each
measurement will appear on the display.
) flashes at every heartbeat.
3. Using the Unit


   Related Manuals for OMRON M10-IT

Comments to this Manuals

Symbols: 0
Latest comments:
  • Antonio Tavares Oct 24, 2014 05:43:
    The problem is not in the Manual
    The problem is that you have to remove the batteries for more than 30 seconds to enter the sequence
    The Japanese engineer that designedth​is should coit SEPPPUKU.