Download Print this page

OMRON M10-IT Instruction Manual: Preparation; Installing/replacing The Batteries

Digital automatic blood pressure monitor.
Hide thumbs

Advertisement

2. Preparation

2. Preparation
2.1

Installing/Replacing the Batteries

1.
Turn the main unit upside down.
2.
Slide the battery cover in the
direction of the arrow while
pressing the ribbed part of the
cover.
3.
Install or replace four
batteries so that the + (positive)
and - (negative) polarities
match the polarities indicated
on the battery compartment.
4.
Put the battery cover back in place.
Slide the battery cover as indicated, until it clicks into place.
Note: The measurement values continue to be stored in memory even
after the batteries are replaced.
10
"
"
AA
size

Advertisement

   Related Manuals for OMRON M10-IT

Comments to this Manuals

Symbols: 0
Latest comments:
  • Antonio Tavares Oct 24, 2014 05:43:
    The problem is not in the Manual
    The problem is that you have to remove the batteries for more than 30 seconds to enter the sequence
    The Japanese engineer that designedth​is should coit SEPPPUKU.