Download Print this page

OMRON M10-IT Instruction Manual: Using The Memory Function

Digital automatic blood pressure monitor.
Hide thumbs


3. Using the Unit

Using the Memory Function

The unit is designed to store the blood pressure and the pulse rate in
the memory for two people (user A and user B) every time a
measurement is completed.
The unit automatically stores up to 84 sets of measurement values
(blood pressure and pulse rate) for each user (A and B). When 84 sets
of measurement values are stored, the oldest record is deleted to save
the most recent values. The unit also stores 8 weeks of morning
averages and 8 weeks of evening averages for each user (A and B).
Average Function
The unit calculates the average reading based on the three most
recent sets of measurement values taken within 10 minutes of the most
recent reading.
Note: If two sets of measurement values are stored in the memory for
the 10 minutes period, the average is based on the two sets of
measurement values. If one set of measurement values is
stored, this is displayed as the average.
To Display the Measurement Values
Select your user ID (A or B).
Press the MEMORY button (
The average value is shown and the average symbol ( )
appears above the memory symbol ( ) on the display.


   Related Manuals for OMRON M10-IT

Comments to this Manuals

Symbols: 0
Latest comments:
  • Antonio Tavares Oct 24, 2014 05:43:
    The problem is not in the Manual
    The problem is that you have to remove the batteries for more than 30 seconds to enter the sequence
    The Japanese engineer that designedth​is should coit SEPPPUKU.