Omron M10-IT Instruction Manual page 19

3.
Hold the grip on the cuff securely
with your hand.
4.
Turn the palm of your hand upward.
5.
Apply the cuff to your upper arm so that the blue strip is centred
on the middle of your inner arm and points down the inside of
the arm. The air tube should run down the inside of your
forearm and be in line with your middle finger.
The bottom of the cuff should be approximately 1 to 2 cm
above the elbow.
Blue strip
Bottom edge 1 to 2 cm
3. Using the Unit
Grip
Fabric fastener
Air tube
EN
19