Telstra Smart Modem 3 Setup page 3
Satellite service
Hide thumbs
Also See for Smart Modem 3:
- Getting started (24 pages) ,
- Get started (16 pages) ,
- User manual
Advertisement
Adding your Telstra Smart Modem
To connect your Telstra smart modem, you will required an Ethernet adapter
between the Telstra Smart Modem and the Starlink Kit. Please make sure you have
the Ethernet adapter. If you don't have one, please go to Telstra.com to purchase
one.
When you first connect your Telstra Smart Modem, it may automatically update its
software. This will take up to 15 minutes to complete.
Your Telstra Smart Modem has a built-in SIM card to backup
your internet service with our 4G mobile network.
You can use the 4G backup service in two scenarios:
1. To get online until your Satellite Internet service is connected or
2. If there's an outage detected, your internet service will
automatically switch over to 4G backup.
Advertisement
Need help?
Do you have a question about the Smart Modem 3 and is the answer not in the manual?
Questions and answers
what is my SSID
The SSID for the Telstra Smart Modem 3 defaults to the factory Wi-Fi name, which is discoverable when the modem resets. However, the exact default SSID is not provided in the available information.
This answer is automatically generated