Lectrosonics DSSM-A1B1 Quick Start Manual page 10

Operating Instructions
Powering On in Operating Mode
Press and hold the Power Button
appears and a bar indicator on the LCD progresses across the screen, return-
ing to the Main Screen.
Hold
for RF
When you release the button, the unit will be operational with the RF output
turned on and the Main Window displayed.
Powering On in Standby Mode
A brief press of the Power Button
complete, will turn the unit on with the RF output turned off. The LCD will
display a reminder that the RF output of the transmitter is turned off. Standby
Mode means no transmission.
564.800
|| |
-40 -20 +0
In this Standby Mode the frequency can be browsed to make adjustments
without the risk of interfering with other wireless systems nearby.
After adjustments are made, press the Power Button again to turn the unit off.
Encryption Key Missing
A blinking <-KEY?-> below next to the Operating Mode Indicator shows that
the Encryption Key is missing. Refer to page 14 in the Operator's Manual for
instructions on setting the Encryption Key.
564.800
<-KEY?->
10
for several seconds while"Hold for RF"
||
-40 -20 +0
, releasing it before the progress bar is
|
The DSSM ships with the key type set as
u
"Universal" and will work right away with any
receiver also set to Universal Key Type.
)
)
564.800
)
)
|
LECTROSONICS, INC.
|