DIGITAL-LOGIC AG
1.5
Recycling Information
Hardware: - Print:
- Components:
Software:
- no problems:
1.6
Technical Support
1. Contact your local DIGITAL-LOGIC Technical Support in your country.
2. Send a FAX to DIGITAL-LOGIC AG with a description of your problem.
DIGITAL-LOGIC AG
Dept. Tech. Support
Nordstr. 4F
CH-4542 Luterbach (SWITZERLAND)
1.7
Limited Warranty
DIGITAL-LOGIC AG warrants the hardware and software products it manufactures and produces to be
free from defects in materials and workmanship for one year following the date of shipment from
DIGITAL-LOGIC AG, Switzerland. This warranty is limited to the original product purchaser and is not
transferable.
During the one year warranty period, DIGITAL-LOGIC AG will repair or replace, at its discretion, any
defective product or part at no additional charge, provided that the product is returned, shipping pre-
paid, to DIGITAL-LOGIC AG All replaced parts and products become property of DIGITAL-LOGIC AG.
Before returning any product for repair, customers are required to contact the factory.
This limited warranty does not extend to any product which has been damaged as a result of accident,
misuse, abuse (such as use of incorrect input voltages, wrong cabling, wrong polarity, improper or in-
sufficient ventilation, failure to follow the operating instructions that are provided by DIGITAL-LOGIC
AG or other contingencies beyond the control of DIGITAL-LOGIC AG), wrong connection, wrong in-
formation or as a result of service or modification by anyone other than DIGITAL-LOGIC AG. Neither if
the user has not enough knowledge of these technologies or has not consulted the product manual or
the technical support of DIGITAL-LOGIC AG and therefore the product has been damaged.
Except, as expressly set forth above, no other warranties are expressed or implied, including, but not
limited to, any implied warranties of merchantability and fitness for a particular purpose, and DIGITAL-
LOGIC AG expressly disclaims all warranties not stated herein. Under no circumstances will DIGITAL-
LOGIC AG be liable to the purchaser or any user for any damage, including any incidental or conse-
quential damage, expenses, lost profits, lost savings, or other damages arising out of the use or in-
ability to use the product.
epoxy with glass fiber
wires are of tin-plated copper
ceramics and alloys of gold, silver
check your local electronic recycling
re-use the diskette after formatting
Fax: +41-32 681 53 31
7
MSM486V Manual V3.22
Need help?
Do you have a question about the MICROSPACE PC/104 and is the answer not in the manual?
Questions and answers