F3Sp-U4P-Tgr Index; Before Using The Device; General Instructions; Routine Maintenance - Omron F3SP-U4P-TGR User Manual

F3SP-U4P-TGR
1

BEFORE USING THE DEVICE.

1.1

GENERAL INSTRUCTIONS

Read this manual and the safety light curtain(s) (SLC) manual carefully
and completely. Make sure the user information provided is understood
before attempting to operate the light curtain.
Keep the manual in a secure and convenient location and confirm
information if necessary.
To guarantee correct installation, carefully follow the instructions of this
manual.
•
Do not touch non-insulated cables, unless they have been
disconnected from the power supply.
•
Make sure that the cables connected to the control unit are not
taut and that they do not hinder the movement of persons or
objects.
•
The control unit does not contain parts subject to maintenance.
Do not open the control unit for any reason, and in case of failure,
send it to our laboratories, indicating the fault and the operation
period.
•
A qualified person, as determined by local regulations, must
confirm that installation, inspection, and maintenance have been
implemented correctly.
Failure to do so may result in lethal or serious injury.
1.2

ROUTINE MAINTENANCE.

Please refer to sec. 10 and the safety light curtain instruction manual.
OMRON Europe and TECHNO-GR refuses to accept any responsibility for
damage to persons or objects due to the incorrect use / installation of the
device.
1.3

PRECAUTION OF SAFETY

The following symbols are used for highlighting items in order to ensure
safe and proper use of the F3SP-U4P-TGR. Highlighted items are critical
for safe operation and must be heeded at all times.
NOTICE
WARNING
User's manual
5