Omron E5AR - MANUAL 2 User Manual page 263

Section 8 Setting data
"PV/SP" display screen selection
Function
Setting
CH
MV display selection
Function
Setting
8-60
spdp
• This setting is used to select the order of display of the "PV/SP"
display screen (Operation level).
Setting range
0: Display in the order:"PV/SP/Bank"
"PV/SP/MV"
1: Display in the order: "PV/SP/MV"
"PV/SP/Bank"
2: Display only "PV/SP/Bank"
3: Display only "PV/SP/MV"
odsl
• This setting is used to select which MV is displayed in "PV/SP/MV"
(Operation level) during heating/cooling control.
• "Heating MV" or "Cooling MV" can be selected.
Setting range
o
: Heating MV
c-o
: Cooling MV
Units Default value
Heating/cooling control
Units Default value
o
l.4
1
l.4