JB Systems LS-RGB-DMX CONTROL Operation Manual page 8

В. Adaress value of all channels on the universal DMX controller is 0.
C. More than two channels have DMX address value of over 255.
2. Led indicator glowed means LED String Controller accepts the address for setting. Its status is
waiting for confirmation. At S6, shifting the value from 255 to 0 means confirming the received
address. If not confirmed in 8 seconds, the DMX setting will be suspended automatically.
Operating instructions
Unscrew the plastic cover (1) and remove the rubber seal (2).
Use a small screwdriver to turn the program selector switch (3).
In both directions until the desired program is selected.
Put the rubber seal (2) in place and fasten the plastic cover (1) to against moisture and dust. The
controller is ІР44.
е IS
Warning! If use sound active program, please don't put the rubber seal (2) back and fasten the plastic
cover (1) or controller can't receive the sound active. Under sound active program, the controller is with-
out water-proof.