Rocstor Y10A330-B1 User Manual

USB-A to 2.5G Ethernet Adapter
Congratulations
Thank you for purchasing this premium Rocstor product. For optimum performance and
safety, please read these instructions carefully before connecting, operating or using this
product. Please keep this manual for future reference.
Introduction
Rocstor introduces a high-performance, cost-e ective solution: the USB-A to 2.5Gbps
Ethernet Adapter. This device allows your USB-A supported host PC to seamlessly
access fast Ethernet networks by connecting to the RJ45 port.
Package Contents
Before attempting to use this unit, please check the packaging and make sure the
following items are contained in the packaging:
• Main Unit x1
• User Manual
Operation
1. Connect USB host PC to USB-A port of this product
2. Connect Gigabit Ethernet port of this product to Ethernet Router with an Ethernet cable
3. Automatically or manually set IP address of computer
User Manual
Y10A330-B1
®
Features
Upstream:
USB Male (Connect to a host computer)
• Supports USB-A input and 2.5Gbps RJ45 output
• Supports twisted pair crossover detection and auto-correction
• USB bus power (no external power supply)
Downstream:
RJ45 X1
• Supports Gigabit Ethernet,10M/100M/1000M
• Support WOL(Wake-On-LAN), Full Duplex ow(10M/100M/1G/2.5G Rate), Auto-Negotiation
• Supports Operating system for computers: Windows: Windows 7, Windows 8,
Windows10, Windows Vista, Windows XP (32/64bit). Mac: Mac OS X 10.6 to 10.12.5
Note: If driver software installation is required (Realtek Gigabit Ethernet USB 3.0 Driver),
please download from below o cial website: https://www.realtek.com
Speci cation
Input / Output Connector
Input
Output
Physical
Operating Temperature Weight
Size
Warranty
Limited Warranty
Environmental
Operating Temperature Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Power Consumption
Voltage
Standby Power
Normal Operating Power
Regulatory Approvals
Certi cations
Accessory Adapter
User Manual
USB-C Male x1
RJ45 ×1
2 Years
0°C to 45°C (32°F to 113°F)
10% to 85% RH (no condensation)
-10°C to 70°C (14°F to 158°F)
5% to 90 % RH (no condensation)
4.75V〜5.25V
<60mA (When Ethernet cable is
not connected)
<250mA 10/100/1000/2500Mbps
FCC, CE
English Version