Omron DEVICENET Operation Manual page 72

Cables, Connectors, and Related Devices
Multi-drop
Connectors
Name
Straight multi-drop connector
with attachment screws
Insertion
direction
Wiring
direction
Straight multi-drop connector
without attachment screws
Insertion
direction
Wiring
direction
Straight multi-drop clamp con-
nector with attachment screws
Attachment Insertion
screw direction
Wiring
direction
The following table shows connectors that can be used for multi-drop connec-
tions. These connectors are not supplied with OMRON products, but must be
ordered separately. Since these connectors cannot be used with all DeviceNet
devices, check that the connector is compatible before ordering.
Model
XW4B-05C4-TF-D Straight multi-drop connector
XW4B-05C4-T-D
XW4G-05C4-TF-D Straight multi-drop connector
Note The multi-drop connectors can be used with the following Units
CS1W-DRM21
CJ1W-DRM21
CPM2C-S100C-DRT
CPM2C-S110C-DRT
CPM1A-DRT21
Specifications
with attachment screws
The insertion and wiring
directions are the same.
Straight multi-drop connector
without attachment screws
The insertion and wiring
directions are the same.
with attachment screws
The insertion and wiring
directions are the same.
DRT1-ID16T(-1) DRT2-ID08(-1)
DRT1-MD16T(-1) DRT2-OD08(-1)
DRT1-OD16T(-1) DRT2-ID16(-1)
DRT1-ID16TA(-1) DRT2-OD16(-1)
DRT1-MD16TA(-1) DRT2-MD16(-1)
DRT1-OD16TA(-1) DRT2-AD04
DRT1-ID32ML(-1) DRT2-DA02
DRT1-MD32ML(-1) DRT2-ROS16
DRT1-OD32ML(-1) DRT2-ID16TA(-1)
DRT1-232C2 DRT2-OD16TA(-1)
DRT1-COM DRT2-MD16TA(-1)
DRT2-ID16S(-1)
DRT2-ID16ML(-1)
DRT2-OD16ML(-1)
DRT2-ID16MLX(-1)
DRT2-OD16MLX(-1)
DRT2-ID32ML(-1)
DRT2-OD32ML(-1)
DRT2-MD32ML(-1)
Section 2-3
Remarks
These multi-drop connec-
tors cannot be used with all
Masters and Slaves. See the
note following this table for a
list of the compatible Units.
DRT2-ID16SL(-1)
DRT2-OD16SL(-1)
DRT2-ID16SLH(-1)
DRT2-OD16SLH(-1)
DRT2-ID32SL(-1)
DRT2-OD32SL(-1)
DRT2-MD32SL(-1)
DRT2-ID32SLH(-1)
DRT2-OD32SLH(-1)
DRT2-MD32SLH(-1)
51