Omron DEVICENET Operation Manual page 137

Connectable Device Lists
RS-232C Connectors for RS-232C Units
Plug XS2D-0901 or equivalent
Hood XM2S-0913 or equivalent
Recommended UL2464 AWG28×5P IFS-RVV-SB
cable
AWG28×5P IFVV-SB
UL2464-SB 5P×AWG28
CO-MA-VV-SB 5P×AWG28
Mounting Bracket for Connector-type I/O Terminals
Model
SRT2-ATT02 Mounting Bracket B
Connector Pressure-welding Pliers for Flat Cable
Model
DWT-A01 Pressure-welding Pliers
MIL Specification Cable for Connector-type I/O Terminals
Model
G79-I50-25-D1 (50 cm)
G79-I75-50-D1 (75 cm)
G79-I50-25-D2 (50 cm)
G79-I75-50-D2 (75 cm)
G79-O50-25-D1 (50 cm)
G79-O75-50-D1 (75 cm)
G79-M50-25-D1 (50 cm)
G79-M75-50-D1 (75 cm)
G79-M50-25-D2 (50 cm)
G79-M75-50-D2 (75 cm)
Cables with 40-pin Connector on One End
Model
G79-A200C-D1 (2 m)
G79-A500C-D1 (5 m)
G79-Y100C-D1 (1 m)
G79-Y200C-D1 (2 m)
G79-Y500C-D1 (5 m)
Connector for Flat Ribbon Cable
Model
XG4M-4030-T
116
Model
Compatible Slaves
DRT1-ID32ML G7TC-ID16, G7TC-IA16
DRT1-OD32ML-1 G7TC-OC16-4, M7F
DRT1-ID32ML-1 G70A-ZIM16-5
DRT1-OD32ML G7TC-OC08/OC16, G70D-SOC16/VSOC16, G70A-ZOC16-3
DRT1-OD32ML-1 G70A-ZOC16-4, G70D-SOC16-1
DRT1-MD32ML Input:
Output: G7TC-OC08/OC16, G70D-SOC16/VSOC16, G70A-ZOC16-3
DRT1-MD32ML-1 Input:
Output: G70A-ZOC16-4, G70D-SOC16-1
40-pin connector on one end, plain wires (28 AWG) on the other end
40-pin connector on one end, wires (28 AWG) with fork terminals attached on the other end
Fork terminal model: 161071-M2
Compatible cable wire gauge: 28 AWG
Specifications
9-pin, female
9-pin, inch pitch
UL listed
Not UL listed
UL listed
Not UL listed
Specifications
Specifications
Compatible Relay Terminals
G7TC-ID16/IA16
G70A-ZIM16-5
Specifications
Specifications
Appendix A
Remarks
OMRON
Fujikura Ltd.
Hitachi Cable, Ltd.