Adding And Deleting Programs - Omron CX-MOTION-MCH Operation Manual

Adding and Deleting Programs

Deleting an Axis from
an MC Unit
1,2,3...
4-5 Adding and Deleting Programs
Adding a Program to
an MC Unit
1,2,3...
34
The following procedure deletes a registered axis from an MC Unit.
1. Select the unwanted axis icon (
lete, click in the toolbar, or press the Delete Key. It is also possible to
right-click the unwanted axis icon and select Delete from the pop-up menu.
2. A dialog box will be displayed to confirm the deletion. Click the Yes Button
to delete the axis. The selected axis will be deleted from the axes regis-
tered in the MC Unit.
The following procedure adds an individual program to a project's MC Unit.
Individual programs can be added with program numbers from 0 to 499.
1. Select the MC Unit or the Motion Programs, or Program Icon in the project
tree and select Insert - Program or click
sible to right-click the Motion Programs or Programs Icon and select Insert
Program from the pop-up menu.
) in the project tree and select Edit - De-
in the toolbar. It is also pos-
Section 4-5