Adding And Deleting Cams - Omron CX-MOTION-MCH Operation Manual

Adding and Deleting CAMs

1,2,3...
4-7 Adding and Deleting CAMs
Adding CAM Tables to
an MC Unit
1,2,3...
1. Select the unwanted subprogram icon (
Edit - Delete, click
possible to right-click the unwanted subprogram icon and select Delete
from the pop-up menu.
2. A dialog box will be displayed to confirm the deletion. Click the Yes Button
to delete the subprogram. The selected subprogram will be deleted from
the subprograms registered in the MC Unit.
The following procedure adds individual CAM tables to a project's MC Unit.
Up to 32 CAM tables can be added to one MC Unit.
1. Select the MC Unit or the CAM Icon in the project tree and select Insert -
CAM or click in the toolbar. It is also possible to right-click the CAM
Icon and select Insert CAM from the pop-up menu.
2. The Insert CAM Dialog Box will be displayed. Set the CAM name, CAM
number, and displacement decimal point position.
3. Click the OK Button. The CAM table will be added to the MC Unit.
) in the project tree and select
in the toolbar, or press the Delete Key. It is also
Section 4-7
37