Printing - Omron CX-MOTION-MCH Operation Manual

Printing

13-1 Printing
Printing Data and
Parameters
The following data and parameters can be selected for printing.
Item Name
A Project Tree
B MC Unit
C All Data or Specified Data These options specify the range of MC Unit parameters to print.
D Unit Parameter
E Zone Parameter
F Task Parameter
G Axis Parameter
H Servo Drive
(Servo Parameters)
I Motion Programs
(Includes subprograms.)
J CAM Data
K Position Data
L Symbol
88
To print project data, select File - Print and select the desired data from the
following Print Choice Dialog Box.
If this option is selected, the project tree is printed.
If this option is selected, the specified MC Unit parameters are printed.
All Data Print all of the data.
Specified Data Print only selected data and parameters.
Select this option to print the Unit Parameters
Select this option to print the zone parameters.
All Print all of the motion task parameters.
Individual Print only the motion task parameters specified in the list.
All Print all of the axis parameters.
Individual Print only the axis parameters specified in the list.
All Print all of the servo parameters.
Individual Print only the servo parameters specified in the list.
All Print all of the programs and subprograms.
Individual Print only the programs and subprograms specified in the list.
All Print all of the CAM table's data.
Individual Print only the CAM table's data specified in the list.
All Print all of the position data.
Select Range Print only the specified range of position data.
Print Address Print only the address and value, not comment and name.
and Values only
Print the symbols.
Function
Section 13-1