Creating A New Project - Omron CX-MOTION-MCH Operation Manual

Creating a New Project

4-1 Creating a New Project
1,2,3...
30
Follow the procedure below to create a new project on the CX-Motion-MCH
Basic Window. When a new CX-Motion-MCH project is being created, a dia-
log box will be displayed for adding an MC Unit after setting the PLC model.
1. On the CX-Motion-MCH Basic Window, select File - New, press the Ctrl+N
Keys, or click
2. The Change PLC Dialog Box will be displayed. Set the model number of
the PLC being used.
3. The Insert MC Dialog Box will be displayed. Set the model number of the
MC Unit being used.
in the toolbar.
Section 4-1