Adding And Deleting Axes - Omron CX-MOTION-MCH Operation Manual

Adding and Deleting Axes

4-4 Adding and Deleting Axes
Adding an Axis to an
MC Unit
1,2,3...
The following procedure adds an individual axis to a project's MC Unit.
Up to 32 individual axes can be added to one MC Unit, of which 30 axes can
be physical.
1. Select the MC Unit, or the Parameter or Axes Icon in the project tree, and
select Insert - Axis or click
click the Axes Icon and select Insert Axis from the pop-up menu.
2. The Insert Axis Dialog Box will be displayed. Set the Axis' name, axis num-
ber, physical axis number, and device type. Also set the Servo Driver se-
ries, Servo Driver model, Servo Driver version, and motor model if Servo
is set as the device type.
3. Click the OK Button. The individual axis will be added to the MC Unit.
in the toolbar. It is also possible to right-
Section 4-4
33