Revision History - Omron CPM1 Programming Manual

A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
The following table outlines the changes made to the manual during each revision. Page numbers refer to the
previous version.
Revision code
1 August 1993
2 December 1993
2A March 1994
2B March 1995
2C July 1995
3 December 1995
3A April 1996

Revision History

Cat. No. W228-E1-08
Date
Original production
The manual was extensively rewritten to incorporate information related the new CPUs, I/O
Units, and Dedicated I/O Units.
Page 268: The function/setting range comments for Word P1+3 have been corrected.
The following instructions have been corrected throughout the manual: INI(––) corrected to
INI(61); PRV(––) corrected to PRV(62); CTBL(––) corrected to CTBL(63); SPED(––) cor-
rected to SPED(64); PULS(––) corrected to PULS(65); INT(––) corrected to INT(89);
STIM(––) corrected to STIM(69); BCMP(––) corrected to BCMP(68); TXD(––) corrected to
TXD(48); RXD(––) corrected to RXD(47); TKY(––) corrected to TKY(18); DSW(––) cor-
rected to DSW(87); 7SEG(––) corrected to 7SEG(88); ASFT(––) corrected to ASFT(17);
CMPL(––) corrected to CMPL(60); MCMP(––) corrected to MCMP(19); SCL(––) corrected
to SCL(66); BCNT(––) corrected to BCNT(67)
Pages 1, 2, 54, 76, 82, 86, 87, 90, 91, 92,
130, 138, 246, 247, 248, 328, 331, 345, 362,
375, 393, 400, 401: SYSMAC Support Soft-
ware (SSS) added.
Page 37: Third sentence in "Programming"
rewritten.
Page 47: The "1 kHz" corrected to "4 kHz" in
the first sentence of 1–4–8 Absolute High–
speed Counter Interrupts (CQM1–CPU44–
E).
Page 61: Areas for reading and writing
reversed for the top diagram. 1–6 Calculat-
ing with Signed Binary Data added.
Pages 66, 68: Text and diagram corrected
for Using the Instruction.
Page 70: Top diagram corrected.
Page 71: Top diagram corrected. Applica-
tion example changed.
Pages 80, 357: IR area words and bits cor-
rected
Page 128: SUM added to the table.
Page 142: First sentence in Example cor-
rected.
Page 146: Sentence added before the note
in Reading Timer PVs.
Page 148: Second paragraph added to Tar-
get Value Comparison.
Page 150: Note 2 corrected.
The following additions/corrections were
made.
Page 53: Default communications settings
changed and note added.
Page 60: Paragraph added on link errors.
Page 63: The following sentence was cor-
rected:
Examples are shown below for the Program-
ming Console.
Page 73: Note added on use of output point
5.
The manual was extensively revised to include the new CPM1 PCs.
Page 296: Precautions Regarding Pulse Output added to Pulse Frequency (F).
Page 415: The bit allocation for the day of the week corrected.
Revision code
Revised content
Page 151: Paragraph added above 5–15–7
MODE CONTROL - INI(––).
Page 176: Bits 12 to 16 corrected to bits 11
to 15 at the top of the page.
Page 200: Top equation and example dia-
gram corrected.
Page 262: Second–to–last paragraph of
Operand Settings corrected. Caution added.
Page 268: Note added.
Page 272: Diagram for the control word cor-
rected.
Page 281: Delimiter corrected to Terminator
in the top diagram and Frame 2 corrected to
Frame 3 in the bottom diagram.
Page 330: First sentence corrected in 8–4
User–defined Errors.
Page 336: Note corrected.
Pages 343 to 345: Appendix A Standard
Models deleted.
Pages 347 to 352: Programming instruc-
tions lists updated.
Page 364: "01" corrected to "00" for AR21.
Page 368: Input constants for IR 00000 to
IR 00007 of DM 6620 corrected.
Page 372: Note added.
Page 200: "#" added to the digit designator.
Bytes 61 to 66 (a to f) have been deleted
from the third sentence in Limitations.
Page 237: @AVG(––) has been deleted.
Page 253: Operand data area ranges cor-
rected for IORF(97).
Page 272: Caution added.
Page 353: "Programming Console" changed
to "Programming Device" and paragraph
added following this change.
Page 373: Appendix E Battery Service Life
deleted.
517