Omron CP1L Operation Manual page 407

Serial Communications
Error Codes
Words
Serial port 1 Serial port 2
on M-type on M-type
CPU Unit CPU Unit
or
Serial port 1
on L-type
CPU Unit
D32250 D32350
D32251 D32351
D32252 D32352
D32253 D32353
D32254 to D32354 to
D32299 D32399
The following error codes are stored in an allocated DM Area word when an
error occurs in Modbus-RTU Easy Master function execution.
Code Name
0x00 Normal end
0x01 Illegal address
0x02 Illegal function code
0x03 Data length overflow
0x04 Serial communica-
tions mode error
0x80 Response timeout
0x81 Parity error
0x82 Framing error
0x83 Overrun error
0x84 CRC error
0x85 Incorrect confirmation
address
0x86 Incorrect confirmation
function code
0x87 Response size over-
flow
0x88 Exception response
0x89 Service being exe-
cuted
0x8A Execution canceled
0x8f Other error
Bits
00 to 07 Response Slave address (00 to F7 hex)
08 to 15 Reserved (Always 00.)
00 to 07 Function code
08 to 15 Reserved
00 to 07 Error code
08 to 15 Reserved (Always 00.)
00 to 15 Number of response bytes
(0000 to 03EA hex)
00 to 15 Response data
(92 bytes maximum)
Description
Not an error.
The slave address specified in the parameter
is illegal (248 or higher).
The function code specified in the parameter is
illegal.
There are more than 94 data bytes.
The Modbus-RTU Easy Master function was
executed when the serial communications
mode was not the Serial Gateway Mode.
A response was not received from the Servo.
A parity error occurred.
A framing error occurred.
An overrun error occurred.
A CRC error occurred.
The slave address in the response is differ-
ence from the one in the request.
The function code in the response is difference
from the one in the request.
The response frame is larger than the storage
area (92 bytes).
An exception response was received from the
slave.
A service is already being executed (reception
traffic congestion).
Executing the service has been canceled.
Other FINS response code was received.
Section 6-3
Contents
373