Omron CP1L Operation Manual page 138

Mounting
DIN Track Installation
Using I/O Connecting
Cable
Wiring Ducts
104
The CP1L CPU Unit, Expansion Units, and Expansion I/O Units can be
mounted to DIN Track. Secure the DIN Track with screws in at least three
places.
When using Expansion Units and Expansion I/O Units, it is possible to use
CP1W-CN811 Connecting Cable to arrange the Units in upper and lower
rows. The following restrictions apply:
• I/O Connecting Cable can be used in one place only, and not in multiple
places.
SYSMAC
CP1L IN
L1 L2/N COM 01 03 05 07 09 11 01 03 05
00 02 04 06 08 10 00 02 04 06
00 01 02 03 04 06 00 01 03
COM COM COM COM 05 07 COM 02
OUT
Whenever possible, route I/O wiring through wiring ducts. Install the duct so
that it is easy to wire from the I/O Units through the duct. It is handy to have
the duct at the same height as the PLC.
Duct
20 mm min.
DIN Track
Unit
20 mm min.
Duct
Note Tighten terminal block screws and cable screws to the following torque.
M4: 1.2 N·m
M3: 0.5 N·m
07 09 11 NC NC COM 01 03 05 07 09 11 01 03 05 07 09 11
08 10 NC NC 00 02 04 06 08 10 00 02 04 06 08 10
CH CH
CH
IN 00 01 02 03 04 05 06 07 08 09 10 11
CH
00 01 02 03 04 05 06 07 08 09 10 11
CH
OUT 00 01 02 03 04 05 06 07
40EDR
CH
00 01 02 03 04 05 06 07
CH CH EXP
04 06
NC
00 01 02 04 05 07 00 02 04 05 07
COM 05 07
NC COM COM COM 03 COM 06 COM 01 03 COM 06
NC NC COM 01 03 05 07 09 11 01 03 05 07 09 11
NC NC 00 02 04 06 08 10 00 02 04 06 08 10
CH CH
CH
IN 00 01 02 03 04 05 06 07 08 09 10 11 IN
CH
00 01 02 03 04 05 06 07 08 09 10 11
CH
OUT 00 01 02 03 04 05 06 07 OUT
40EDR
CH
00 01 02 03 04 05 06 07
CH CH EXP
NC
00 01 02 04 05 07 00 02 04 05 07
NC COM COM COM 03 COM 06 COM 01 03 COM 06
30 mm
40 mm
DIN Track
NC NC COM 01 03 05 07 09 11 01 03 05 07 09 11
NC NC 00 02 04 06 08 10 00 02 04 06 08 10
CH CH
CH
00 01 02 03 04 05 06 07 08 09 10 11
CH
00 01 02 03 04 05 06 07 08 09 10 11
CH
00 01 02 03 04 05 06 07
40EDR
CH
00 01 02 03 04 05 06 07
CH CH EXP
NC
00 01 02 04 05 07 00 02 04 05 07
NC COM COM COM 03 COM 06 COM 01 03 COM 06
81.6 to 89.0 mm
30 mm
Duct
Section 3-3
CPU
Rack
Mounting
bracket