I/O Table Verify - Omron CJ - 10-2005 Manual

I/O Table Operations
3-7-2

I/O Table Verify

Key Sequence
48
I/O Table Error Details
Name Address
Word Bit
CPU Bus Unit A261 00 ON: Error in CPU Bus
Setup Area Ini-
tialization Error
Flag
I/O Overflow 02 ON: Overflow in maxi-
Flag
Duplication 03 ON: The same unit
Error Flag
I/O Bus Error 04 ON: I/O bus error
Flag
SYSMAC BUS 06 ON: SYSMAC BUS
Recognition
Error Flag
Special I/O Unit 07 ON: Error in a Special
Error Flag
I/O Uncon- 09 ON: I/O detection has
firmed Error
Flag
RUN
OK OK
This operation is used to compare the I/O table registered in the PLC (regis-
tered I/O tables), with the actual I/O Units mounted to the PLC Racks.
Initial display
SHIFT
FUN
Contents
Unit Setup
Turns OFF when I/O
tables are generated
normally.
mum number of I/O
points.
Turns OFF when I/O
tables are generated
normally.
number was used
more than once.
Turns OFF when I/O
tables are generated
normally.
Turns OFF when I/O
tables are generated
normally.
detection ended in an
error.
Turns OFF when I/O
tables are generated
normally.
I/O Unit
Turns OFF when I/O
tables are generated
normally.
not been completed.
Turns OFF when I/O
tables are generated
normally.
MONITOR PROGRAM
OK
CH
VRFY VRFY
*DM
...
Section 3-7
When At Setting
changing startup timing
to RUN
mode
Held Cleared When I/O
tables are
created