Omron CJ - 10-2005 Manual page 15

About this Manual:
This manual describes the installation and operation of the CQM1H-PRO01-E, CQM1-PRO01-E and
C200H-PRO27-E Programming Consoles for use with CS-series and CJ-series Programmable Con-
trollers and includes the sections described below. The CS Series and CJ Series are subdivided as
shown in the following table.
Unit
CPU Units
Basic I/O Units
Special I/O Units
CPU Bus Units
Power Supply Units
Please read this manual and all related manuals listed in the table on the next page carefully and be
sure you understand the information provided before attempting to use the CQM1H-PRO01-E, CQM1-
PRO01-E, or C200H-PRO27-E Programming Console to program, set up, or operate a PLC System.
Section 1 gives a brief overview of the functions performed by the Programming Console, as well as
Programming Console specifications and connection procedures. It also lists the differences between
the operation of the Programming Consoles for CS/CJ-series PLCs and previous Programming Con-
soles.
Section 2 provides information on how to set up the Programming Console for operation. It also
describes how to write a simple program from the Programming Console.
Section 3 describes the basic operations of the Programming Console, including initializing memory
and creating I/O tables. The three input modes available on the Programming Console are also
described.
Section 4 describes how to create and edit programs from the Programming Console.
Section 5 describes how to monitor programs in different display modes to check and modify the user
programs. Change values from various displays is also described.
Section 6 includes information on reading and setting the clock, reading the cycle time, and reading/
clearing error messages.
Section 7 provides information on how to format Memory Cards before use, and procedures for trans-
ferring data between Memory Cards and the CPU Unit.
Section 8 lists the settings in the PLC Setup.
Appendix A provides a ASCII coding list, Appendix B provides a list of operating error messages,
and Appendix C provides a PLC Setup Setting Sheets.
CS Series
CS1-H CPU Units: CS1H-CPU@@H
CS1G-CPU@@H
CS1 CPU Units: CS1H-CPU@@-EV1
CS1G-CPU@@-EV1
CS1D CPU Units:
CS1D CPU Units for Duplex-CPU Systems:
CS1D-CPU@@H
CS1D CPU Units for Single-CPU Systems:
CS1D-CPU@@S
CS1D Process CPU Units:
CS1D-CPU@@P
CS-series Basic I/O Units
CS-series Special I/O Units
CS-series CPU Bus Units
CS-series Power Supply Units
Note: Use the special CS1D Power Supply
Units for CS1D PLCs.
CJ Series
CJ1-H CPU Units: CJ1H-CPU@@H
CJ1G-CPU@@H
CJ1 CPU Units: CJ1G-CPU@@-EV1
CJ1M CPU Units: CJ1M-CPU@@
CJ-series Basic I/O Units
CJ-series Special I/O Units
CJ-series CPU Bus Units
CJ-series Power Supply Units
xvii