Inputting Instructions; Procedure For Inputting Instructions - Omron CJ - 10-2005 Manual

Inputting Instructions

4-1 Inputting Instructions
4-1-1

Procedure for Inputting Instructions

1,2,3...
Initial display
54
RUN
No
Programs can be input in PROGRAM mode only.
1. Press the FUN and CHG Keys to switch tasks and bring up the initial dis-
play.
000000 CT00
↓
000000 CT00
END(001)
↑
↓
000001ADR OVER
• The END(001) instruction will be displayed at program address
000000 the first time instructions are written into a task. When the
END(001) instruction is displayed, all instructions input will be inserted
before the END(001) instruction.
• If the address after the END(001) instruction is displayed, ADR OVER
will appear. Instructions cannot be executed, even if they are input
while ADR OVER is displayed, so press the Up Key to return to the
END(001) instruction display.
2. Input instructions while the END(001) instruction is displayed.
↓
a) Input LD 000100.
AA
0
1
LD
MONITOR PROGRAM
No OK
Switch tasks
CHG
FUN
000000 IT000
000000 IT000
END(001)
↑
000001ADR OVER
000000 CT00
↑
END(001)
000000
0
LD
000001 CT00
WRITE
END(001)
Section 4-1
↓
↓
000100