I/O Multipoint Monitor - Omron CJ - 10-2005 Manual

I/O Multipoint Monitor

5-3

I/O Multipoint Monitor

Key Sequence
Operation Example
1,2,3...
3. Start monitoring.
4. Press the CLR Key to exit Simple I/O Monitor.
RUN
OK OK
This operation is used to monitor up to four bits or words simultaneously.
• Four bits and/or words can be monitored at the same time, but only 2 of
these can be displayed simultaneously.
Simple I/O Monitor
In the following example, T0001, CIO 000001, D00000, and CIO 1225 are
monitored.
1. Specify the bits and words for monitoring, in succession as shown in the
following steps. The status/present values of the specified bits and words
will appear at the top of the display. Methods for specifying bits or words
are the same as for Simple I/O Monitor.
CLR
a) Specify T0001 and the present value will appear at the top of the dis-
play.
TIM 1
b) Specify CIO bit 000001 and the status will appear at the top of the dis-
play.
CONT
SHIFT
1
#
0011
MON
000202
CLR
WORD
MONITOR PROGRAM
OK
Simple I/O Monitor
000000 CT00
...
T0001
MON
The present value
for T 0001.
000001
MON
T0001
The present value
for 000001.
The present value
for T 0001.
Section 5-3
1234
Present value
0011
0100
^ OFF
0100
87