Unsigned Decimal Monitor - Omron CJ - 10-2005 Manual

Monitor Display Format
5-4-3

Unsigned Decimal Monitor

Key Sequence
Operation Example
1,2,3...
5. Press the CLR Key again to return the display from Signed Decimal Mon-
itor to either Simple I/O Monitor or I/O Multipoint Monitor.
RUN
OK OK
This operation converts the hexadecimal contents of word data into unsigned
decimal data for display.
This operation can be performed during Simple I/O Monitor or I/O Multipoint
Monitor.
Simple I/O Monitor display
I/O Multipoint Monitor display
In the following example, CIO 2670 is monitored using an unsigned decimal
display.
1. Access the Simple I/O Monitor or I/O Multipoint Monitor display and display
the word for monitoring.
During I/O Multipoint Monitor, the word at the top of the screen will be
changed.
2. Convert the display format to unsigned decimal.
,–IR
TR
3. Convert the display to a double-word display.
From this display, word data can be converted to signed decimal. (Refer to
page 98.)
4. Press the CLR Key to exit double-word display and return to Unsigned
Decimal Monitor.
2670
CLR
MONITOR PROGRAM
OK
,–IR ,–IR
TR TR
CIO 2670
2670
2670
,–IR
TR
When CIO 2671 is 0000 Hex:
2671 2670
,IR+
,IR
2670
CLR
Section 5-4
FFF0
FFF0
&65520
&65520
&65520
93