Monitor/Set - Omron F39-MC11 Instruction Manual

Changing selected channel
when connected to three sensors
CH(-)
CH(-)
CH(-)
The indicator will be displayed as illustrated below, depending on which
function is to be set. This indicates that a setting item is to be
proceeded to all the sensors.
If the channel is changed while making a setting, content of the setting
will be cancelled.
- 13 -
1ch is selected
(After power on)
CH(+)
2ch is selected
CH(+)
3ch is selected
CH(+)
1ch is selected
CAUTION
8

MONITOR/SET

After the changing the setting of the sensor, a start-up check must
be conducted. Normal operation can only be allowed after safety is
confirmed.
A change of the setting can only be done under observance of laws/
standards which are related to safe operation of the product.
This function enables the monitoring of current set values and functions
of the sensor. When a set value is changed, content of the change is
reflected on sensor. The value which is indicated first in each category
is the current set value.
The method of change into each mode is as illustrated below.
By pressing [ENTER] key when the selected function is displayed,
editing of selected function becomes possible.
(i)F3SN
1.Fixed blanking
2.Fl o ating blanking
1.FIX 2.FLO
B.Error log view
B.LOG
A.Threshold teach 0.ID
A.TCH 0.ID
CAUTION
3.Auxiliary output
4.Ext. indicator output
3.AUX
5.Ext. device monitor
Blinking
6.Start interlock
[UP][DOWN]Key
9.initialize 7.Restart interlock
9.INI
- 14 -
4.E.I.O.
5.EDM
6.SIL
7.RIL