Setting Master Properties; Cs1W-Drm21 And Cj1W-Drm21 - Omron 3G8F5-DRM21-E - V2 Operation Manual

Setting Master Properties

Registering in the Edit
Device Parameters
Window
4-4

Setting Master Properties

4-4-1

CS1W-DRM21 and CJ1W-DRM21

1,2,3...
The following master candidates will be displayed in the Register to other
Device Menu.
4. Select the device with which the slave is to be registered.
The slave registered will be automatically added to the scan list of the mas-
ter and I/O will be allocated.
If the user attempts to register a slave that has already been registered with
another device, the following confirmation window will be displayed. By click-
ing the Yes Button, the duplicated registration of the slave will be possible.
However, if the registration is duplicated, the slave will only be able to commu-
nicate with one device. If the same slave is registered to multiple masters, it
will lead to communications errors.
Slaves can be added and I/O areas allocated in the Edit Device Parameters
Window. Refer to 4-7 Master Parameter Editing Details (Tab Descriptions) on
page 78 for details.
This section describes how to set properties for OMRON masters. The
Device – Property Command is used.
To set the master and slave functions, use the following procedure.
1. Select the master from the Network Configuration Window on the right.
2. Select Device and Property.
Section 4-4
71