Instant Pot Duo Mini Getting Started Manual page 25

Care, cleaning and storage
The Instant Pot multicooker base contains electrical components. To avoid fire,
electrical leakage or personal injury, make sure the multicooker base stays dry.
• DO NOT immerse the multicooker base in water or other liquid, or attempt
to run it through a dishwasher.
• DO NOT rinse the heating element.
• DO NOT submerge or rinse the power lead or plug.
Removing and installing parts
Silicone sealing ring
Remove the sealing ring
Grip the edge of the silicone and pull the
sealing ring out from behind the circular
stainless steel sealing ring rack.
With the sealing ring removed, inspect
the steel rack to make sure it is secured,
centred and an even height all the way
around the lid. Do not attempt to repair a
deformed sealing ring rack.
Illustrations in this document are for reference
only and may differ from the actual product.
Always refer to the actual product.
WARNING
Install the sealing ring
Place the sealing ring over the sealing ring
rack and press it into place. Press down
firmly to prevent puckering.
When installed properly, the sealing ring
is snug behind the sealing ring rack and
should not fall out when the lid is turned
over.
Incorrect
instantpot.co.uk | 25