Prepare Electrical Service; Prepare Location - MTI AUTOFRY -40E Operator's Manual

AutoFry
MTI-40E Operator's Manual
Set-up & Installation:
The AutoFry comes from the factory complete with everything you need to start cooking except food
and oil. Following these simple instructions will have your AutoFry installed and ready to earn profits for
you in as little as 30 minutes.
Motion Technology, Inc. is not responsible for local requirements that additional equipment and / or
appliances may be required for a food preparation area in a store, which may include but not limited to
Type II hood, vent fan, grease interceptors and additional sinks. Check with your local building and / or
health departments for specific requirements.

Prepare Electrical Service:

A licensed electrician in accordance with the National Electrical Code (NEC) and all local codes must
install the electrical service. Do not remove or otherwise alter the factory supplied power cord or plug.
Never attach the AutoFry to an extension cord. Consult the identification tag for equipment wattage and
voltage.
Motion Technology, Inc. will not assume responsibility for any injuries or equipment
malfunctions resulting from non-conforming electrical installations.
Prepare your location:
Choose a location that is level. Adequate space must be provided so the AutoFry can be moved forward
for service without interference.
63-0130 MTI-40E TS OM 01/24 5