Button Configuration; Before You Start - TypeS T400 PLUS Care & Use Instructions

6. BUTTON CONFIGURATION

Apply configuration and settings to the AI
Dashcam using the 4 function buttons. Please
refer to the section below for the functions of
each button under different modes.
Video Mode Video Mode
For more information about AI Dashcam operation, please refer to the e-manual on www.typesauto.com.

7. BEFORE YOU START

Before installing onto your vehicle, please test the product by powering it on and connecting
it to the TYPE S Drive App (Section 13). Please use this document as your reference for detailed
instructions and product information.
6
Switch between ADAS/PIP/Front/
Rear display (click once)
Microphone On/Off (click once)
Snapshot (click once)
Record (press and hold)
Open Settings Menu (click once)
NOTE: PIP (picture-in-picture) and Rear views only
available when the Rear Camera is connected.
Function
Buttons