Specifications Overview - Allied Vision FPD-Link III STP User Manual

Specifications overview

Feature
Product code
PCB number
PCBA number
Connector to the host
Connector to the camera
Connector to external power
Input voltage
Power requirements
FPD-Link III deserializer chip
Supported embedded boards
Supported cameras
Supported HDS STP cables for camera
connections
Supported FPC cables
Dimensions (Length × width × height [mm])
Mass (deserialier board only)
1,2
Operating temperature
Storage temperature
Relative humidity
1
For personal protection against burns according to section 9.3 IEC 62368-1
2
If enclosed in a housing, ensure that the component temperatures of U4 and L3 do not exceed 105 °C.
See Figure 5 on page 32.
Table 5: Deserializer Board FPD-Link III STP to CSI-2 specifications overview
Specifications of the deserializer chip
This deserializer board incorporates the FPD-Link III deserializer chip Texas
Instruments DS90UB954-Q1. For specifications, see www.ti.com.
Alvium CSI-2 Adapter for Auvidea JNX30 Carrier Board
The 38373 Alvium CSI-2 Adapter for Auvidea JNX30 Carrier Board is manufactured
and offered by Auvidea. For information, see https://auvidea.eu.
Deserializer Board FPD-Link III STP to CSI-2 User Guide V1.0.1
Specification
19502
18778 (see PCB and PCBA number
18779 (see PCB and PCBA number
Hirose FH55-22S-0.5SH FPC connector
HSD STP connector Code Z (water blue)
3-pin Phoenix MC 1.5/3-G-3.5 terminal connector,
matching cable connector
Phoenix Contact MC 1,5/3-ST-3,5
4.5 VDC to 5.5 VDC or 10.8 VDC to 26.4 VDC
Max. 7 W (depending on the camera model)
Texas Instruments DS90UB954-Q1
• Auvidia JNX30 carrier board with NVIDIA Jetson
Xavier NX SoM, connected via Alvium CSI-2
Adapter for Auvidea JNX30 Carrier Board
(see note below)
• NVIDIA Jetson AGX Orin DevKit via 19616
Adapter Board for NVIDIA Jetson AGX Orin
DevKit (under development)
Alvium FP3 STP
Allied Vision 184205 18406
Allied Vision 12316, 12317, 12318, 18947
65.9 × 40 × 14.2 (incl. connectors)
<20 g
-20 °C to +50 °C
-20 °C to +70 °C
0% to 80% (non-condensing)
Specifications
on page 32)
on page 32)
31