Allied Vision FPD-Link III STP User Manual page 29

Compliance, safety, and intended use
• Connect power as described in Connecting power on page 42.
Ground loops
Unsuitable connections can lead to different potentials between the camera
system GND and the environmental shield/chassis GND caused by ground loops.
This can damage the camera and the connected devices or cause malfunctions.
• Avoid potential differences between the camera housing and GND.
• All wiring must be done by authorized personnel, according to the
corresponding technical standards.
• You may mount the camera electrically isolated.
• Read the Avoiding Ground Loops in Vision Systems application note.
More information
See the Avoiding Ground Loops in Vision Systems application note at
www.alliedvision.com/en/support/technical-documentation/
alvium-csi-2-documentation.
Deserializer Board FPD-Link III STP to CSI-2 User Guide V1.0.1 29